54" Laminator shown Dimensions: 77" Wide x 32" Deep x 48" High Approximate Weight/Shipping Weight: 225 lbs/300lbs Call or email for pricing.

Coda's Cold-Mount® System combines Coda's award-winning Cold-Mount® laminator with Coda's newly designed roll-feed and automatic scrap rewind. The unit comes on a sturdy floor stand with locking casters and storage space for roll materials. Available in widths from 14" to 54", the Cold-Mount® System is easy to use and can be run by one operator. The Cold-Mount® System is an integrated production machine ready to be installed in any finishing department that has a requirement to mount and laminate using pressure sensitive materials. The Coda Cold-Mount® System is ideal for low-to-high volume production in a small-to-medium sized shop, or as an additional finishing station in a large shop where more expensive, high production machines are committed to very large runs or thermal lamination. The features on Coda's Cold-Mount® System are comparable to production machines requiring a higher investment of money and time. Click here for Cold-Mount® System Photo Gallery PDF Brochure (2550KB)

Key Features: Automatic scrap rewind Operator adjustable tension control Self-locking 3" core supply and take-up mandrels Safety motor stops - automatic and manual Precise roller height and pressure adjustment with indicators Sturdy base with locking casters Stainless steel hooks underneath laminator for mandrel storage Powder-coated finish for durability Single person operation Technical support direct from the manufacturer Three year warranty on parts and workmanship Built in the USA!

Features:

• Pressure Adjustment Indicators
• Pressure indicators provide visual confirmation that the pressure on each end of the roller is equal. Heavy duty compression springs provide precise nip roller pressure which can be adjusted depending on the type of material used
• Adjustable Roller Gap
• The roller gap is easily adjusted to fit materials up to two inches thick
• Spring Loaded Top Roller
• The top roller will follow variations in material thickness
• Self-Locking Supply Mandrel
• Rolls are slid into position on the mandrel and automatically lock as soon as the mandrel starts rotating
• Supply Roll Tension Control
• An adjustable brake fitted to the supply roll drive allows for the tension to be adjusted at any time
• Automatic Release Liner Take-Up Mandrel
• The take-up mandrel is driven by the supply mandrel through a clutched chain and sprocket drive system that provides a constant pull on the release liner regardless of the roll diameter
• Silicone Rollers
• Precision ground, long life rollers will not be damaged by exposed adhesive
• Speed Control
• Speed can be adjusted ranging from 0-20 linear feet/minute for 14"-44" Laminators, 0-26 linear feet/minute for 54" Laminator
• Manual and Automatic Mode
• Automatic mode allows the machine to run continuously at the speed dial reference speed. Manual mode allows the machine to run at the speed dial reference speed when the foot switch is pressed
• Automatic Motor Safety Stop
• Laminator automatically shuts off if the sensor detects the presence of a foreign object going between the rollers
• Manual Safety Stop located on the control panel. Pushing will stop laminator operation immediately
• Power Reset Button. Pushing this button resumes normal operation of the laminator after any safety stop
• Foot Pedal allows for hands free operation
• Floor Standing Portable Utility Base
• Laminator is secured to a sturdy machine base which has locking casters and mandrel storage
• Laminator Widths Available: 14", 26", 34", 44", and 54".
• Power Requirements: All models use standard 110-120v, 3 amps