|
- Cold-Mount® Pre-Coated Boards - Single Weight
This is a 40 point (approximately 1/16" thick) cardboard mount. It is
suitable for mounting smaller prints. Because it is a fiber based board it is
affected by changes in moisture content and may warp or bow in larger sizes or
in situations where there may be large changes in humidity. This board is not
available in sizes larger than 20x24".
|
Item Number |
Size |
SW0405
SW0507 |
4x5"
5x7" |
SW0810
SW0812 |
8x10"
8x12" |
SW08511
SW1114 |
8.5x11"
11x14" |
SW1117
SW1218 |
11x17"
12x18" |
SW1620
SW1624 |
16x20"
16x24" |
| SW2024 |
20x24" |
- Cold-Mount® Pre-Coated Boards - Double Weight
This is an 80 point (approximately 1/8" thick) cardboard mount. It is
suitable for mounting smaller prints. Because it is a fiber based board it is
affected by changes in moisture content and may warp or bow in larger sizes or
in situations where there may be large changes in humidity. This board is not
available in sizes larger than 20x24".
|
Item Number |
Size |
DW0405
DW0507 |
4x5"
5x7" |
DW0810
DW0812 |
8x10"
8x12" |
DW08511
DW1114 |
8.5x11"
11x14" |
DW1117
DW1218 |
11x17"
12x18" |
DW1620
DW1624 |
16x20"
16x24" |
| DW2024 |
20x24" |
Note: Custom sizes are available on all of the products listed above.
| 